Double Zone Circuit
excl. shipping·Germany 2–4 working days, other countries 4–10 working days
Made to order — production typically takes 2–4 working days
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 300 × 200 cm
Compatibility: Brand-open for 1:24 RC drift chassis (e.g. RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24) · 1:28 chassis also run on these mats
PVC RC drift track — roll out and drive. Layout-optimised for drift in Germany. Add Track Reload for the right slide.
- Made in Germany
- Layout-optimised
- Track Reload ready
- Waterproof
- UV-stable
- 2–4 working days production
Product details
Description
At the Double Zone Circuit, it’s all about how cleanly you hit your line. Measuring 300 × 200 cm, this RC drift track combines sweeping corners, technical hairpins, and changing radii into a diverse layout. Practice controlled transitions, maintain your drift through corner combinations, and work your way closer to the marked zones lap after lap.
The special detail: double clipping zones with 1× and 2× markings. They provide clearly recognizable targets for your training and enable your own scoring challenges with friends. First, use the 1× areas for orientation, then increase the challenge by specifically aiming for the narrower 2× areas. For joint sessions, you can develop your own scoring system based on these.
Realistic asphalt textures, pronounced tire marks, red and white curbs, as well as printed green and gravel areas give the track its motorsport look. The lane markings help you find turn-in points and transitions, allowing you to compare your runs.
What to expect:
- 300 × 200 cm RC drift mat with a diverse track layout.
- Double clipping zones with 1×/2× markings for targeted precision training.
- A combination of wide curves, tight hairpins, and flowing direction changes.
- Detailed printing with asphalt look, drift marks, and red-white curbs.
- Robust, easy-care PVC Frontlit material with 456 g/m².
- Quickly deployed and rollable for space-saving storage after the session.
Place the mat on a clean, level surface and tune your vehicle to the surface. Tires and setup influence handling; for the desired sliding behavior, we recommend our separately available Track Reload.
Scope of delivery: one printed PVC drift mat "Double Zone Circuit", 300 × 200 cm. Curbs, vegetation, and other track details are part of the flat printed motif. Vehicles and separate accessories are not included.
Find your flow. Hit the zone. Make the next run even cleaner.
Technical data
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 300 × 200 cm
- Material
- Premium PVC tarpaulin
- UV-HD print
- Use
- Indoor
- Surface
- PVC tarpaulin; Track Reload recommended for sliding behavior
- Waterproof
- Yes
- Origin
- Made in Germany
In the box
- 1× Community Track 2 (Drift Track)
- Cars, barriers, curbs and surface spray shown in images are only included when explicitly listed above.
Frequently asked questions
Is the track ready to race straight away?
The layout is optimised for drift. For the right slide behaviour, we recommend Track Reload PVC Drift Surface Spray from the shop.
Will the sheet curl back up?
Right after unrolling you may still see creases. They flatten out over time on their own – warm steam (steam cleaner or iron held at a distance) speeds this up. Lightly weighting the corners helps as well.
Which vehicles are compatible?
The 1:24 variant is brand-open for 1:24 chassis — examples: RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24; 1:28 chassis are generally suitable too, depending on chassis, tyres and setup. The 1:43 variant is built around the Sturmkind DR!FT-Racer. Carrera HYBRID (manufacturer scale 1:50) is planned through the track designer.
How do I clean the track?
Wipe dry with a microfibre cloth. Slightly damp if necessary — no solvents.
Are custom sizes available?
Yes, custom layouts and sizes on request. Simply contact us by email or WhatsApp.
