Community Track 2
excl. shipping·Germany 2–4 working days, other countries 4–10 working days
Made to order — production typically takes 2–4 working days
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 350 × 210 cm
Compatibility: Brand-open for 1:24 RC drift chassis (e.g. RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24) · 1:28 chassis also run on these mats
PVC RC drift track — roll out and drive. Layout-optimised for drift in Germany. Add Track Reload for the right slide.
- Made in Germany
- Layout-optimised
- Track Reload ready
- Waterproof
- UV-stable
- 2–4 working days production
Product details
Description
Your next drift takes you along the water: Designed by a user in our track editor, this RC drift track combines a flowing layout with a lovingly detailed environment.
On the left side, the turns lead around an elongated pond landscape and a prominent circular passage featuring a colorful logo. On the right, large arcs alternate with tighter corners around the designed interior areas. The printed clipping zones help you consciously choose your line and specifically train corner transitions.
Red and white curbs, visible tire marks, and varied asphalt textures give the graphics their racetrack character. A pit area, a spectator grandstand, and the diagonally placed start-finish marker complete the scenery.
A track from the community for everyone who enjoys connected drift lines and values a design full of character.
Technical data
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 350 × 210 cm
- Material
- Premium PVC tarpaulin
- UV-HD print
- Use
- Indoor
- Surface
- PVC tarpaulin; Track Reload recommended for sliding behavior
- Waterproof
- Yes
- Origin
- Made in Germany
In the box
- 1× Community Track 6 (Drift Track)
- Cars, barriers, curbs and surface spray shown in images are only included when explicitly listed above.
Frequently asked questions
Is the track ready to race straight away?
The layout is optimised for drift. For the right slide behaviour, we recommend Track Reload PVC Drift Surface Spray from the shop.
Will the sheet curl back up?
Right after unrolling you may still see creases. They flatten out over time on their own – warm steam (steam cleaner or iron held at a distance) speeds this up. Lightly weighting the corners helps as well.
Which vehicles are compatible?
The 1:24 variant is brand-open for 1:24 chassis — examples: RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24; 1:28 chassis are generally suitable too, depending on chassis, tyres and setup. The 1:43 variant is built around the Sturmkind DR!FT-Racer. Carrera HYBRID (manufacturer scale 1:50) is planned through the track designer.
How do I clean the track?
Wipe dry with a microfibre cloth. Slightly damp if necessary — no solvents.
Are custom sizes available?
Yes, custom layouts and sizes on request. Simply contact us by email or WhatsApp.
