Community Track 1
excl. shipping·Germany 2–4 working days, other countries 4–10 working days
Made to order — production typically takes 2–4 working days
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 300 × 200 cm
Compatibility: Brand-open for 1:24 RC drift chassis (e.g. RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24) · 1:28 chassis also run on these mats
PVC RC drift track — roll out and drive. Layout-optimised for drift in Germany. Add Track Reload for the right slide.
- Made in Germany
- Layout-optimised
- Track Reload ready
- Waterproof
- UV-stable
- 2–4 working days production
Product details
Description
Varied lines and plenty of turns: This RC drift track was designed by a user in our track editor and brings an individual community idea to your drift setup.
The winding layout combines generous arcs with tighter corner combinations and two eye-catching circular passages. Different radii invite you to vary your line choice, practice transitions, and coordinate drift angles and vehicle control. The marked clipping zones provide you with visible orientation points.
There is also a lot in the design visually: printed tire marks, asphalt structures, red and white curbs, and greened inner areas with tire details create a racetrack atmosphere. The designed pit area, the start-finish marking, and the colorful logo complement the individual look.
A versatile community layout for everyone who likes to discover new lines while drifting and work on their precision.
Technical data
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 300 × 200 cm
- Material
- Premium PVC tarpaulin
- UV-HD print
- Use
- Indoor
- Surface
- PVC tarpaulin; Track Reload recommended for sliding behavior
- Waterproof
- Yes
- Origin
- Made in Germany
In the box
- 1× Community Track 5 (Drift Track)
- Care & setup instructions
- Cars, barriers, curbs and surface spray shown in images are only included when explicitly listed above.
Frequently asked questions
Is the track ready to race straight away?
The layout is optimised for drift. For the right slide behaviour, we recommend Track Reload PVC Drift Surface Spray from the shop.
Will the sheet curl back up?
Right after unrolling you may still see creases. They flatten out over time on their own – warm steam (steam cleaner or iron held at a distance) speeds this up. Lightly weighting the corners helps as well.
Which vehicles are compatible?
The 1:24 variant is brand-open for 1:24 chassis — examples: RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24; 1:28 chassis are generally suitable too, depending on chassis, tyres and setup. The 1:43 variant is built around the Sturmkind DR!FT-Racer. Carrera HYBRID (manufacturer scale 1:50) is planned through the track designer.
How do I clean the track?
Wipe dry with a microfibre cloth. Slightly damp if necessary — no solvents.
Are custom sizes available?
Yes, custom layouts and sizes on request. Simply contact us by email or WhatsApp.
