Markenbeispiel
RhinoRacing RTS
Heckgetriebenes 1:24-Driftchassis, das viele Einsteiger als erstes Setup fahren. Auf unseren 1:24-Layouts sind Radien und Sektionsbreiten auf diese Fahrzeuggröße ausgelegt.
RC drift track · 1:24 scale
RC drift track 1:24, ready to roll out.
Currently nine drift-optimised PVC layouts from 250 × 150 cm – 591 × 300 cm — with new ones added regularly. Brand-open: your chassis, your track — examples are RhinoRacing RTS, Atomic, TG Racing, ARKEDGE or HPI Stage-D24. 1:28 chassis run on them too.
Why 1:24
The scale with the most authentic drift feel.
1:24 is the sweet spot in RC drift: big enough for visible angles, countersteering and real weight transfer — small enough for a complete track to fit in a living room, hobby room or garage.
- Robust PVC with a stable edge — rollable and foldable
- Photorealistic asphalt print with curbs, start line and tyre marks
- Layouts optimised for drift by their flow — radii matched to the 1:24 turning circle
- Adjust slip behaviour yourself with Track Reload spray
- Shipping to Germany & Europe with tracking via GLS/DPD
Sizes & prices
All 1:24 tracks at a glance.
The dimensions are the real printed measurements of the 1:24 variant. Plan a bit of run-off all round — that way even an over-cooked drift stays on the track.
Layout
Wohnzimmer Drift
250 × 150 cm
106,95 €
To the track
Layout
Double Zone Circuit
300 × 200 cm
122,95 €
To the track
Layout
HIGH FLOW
330 × 212 cm
138,95 €
To the track
Layout
Back Entry Circuit
350 × 230 cm
154,95 €
To the track
Layout
Drift Heaven
400 × 200 cm
155,95 €
To the track
Layout
BIG Drift
400 × 250 cm
186,95 €
To the track
Layout
Competition Track
420 × 245 cm
186,95 €
To the track
Layout
LAKESIDE DRIFT CIRCUIT
480 × 250 cm
218,95 €
To the track
Layout
HIGH END DRIFT
500 × 253 cm
223,95 €
To the track
Need a custom size? In every buy box you can request an individual size by email.
Setup
Ready to drive in two minutes.
Roll the track out, let it settle briefly, spray on Track Reload — done. If the mat still has creases after the first unroll, it needs a bit of time to lie completely flat. Warm steam (steam cleaner or an iron with steam) speeds this up significantly.
Layouts
The range keeps growing — currently nine layouts.
We're continuously developing new track layouts and sizes. What you see here is the current state — not the end of the range.
Wohnzimmer Drift
1:24 · 250 × 150 cm · 106,95 €
Double Zone Circuit
1:24 · 300 × 200 cm · 122,95 €
HIGH FLOW
1:24 · 330 × 212 cm · 138,95 €
Back Entry Circuit
1:24 · 350 × 230 cm · 154,95 €
Drift Heaven
1:24 · 400 × 200 cm · 155,95 €
BIG Drift
1:24 · 400 × 250 cm · 186,95 €
Competition Track
1:24 · 420 × 245 cm · 186,95 €
LAKESIDE DRIFT CIRCUIT
1:24 · 480 × 250 cm · 218,95 €
HIGH END DRIFT
1:24 · 500 × 253 cm · 223,95 €
New layouts are in the works.
Our 1:24 range is continuously expanded — new layouts, new sizes. Want a specific layout or a custom size? Let us know.
Discover chassis
Your chassis. Your line. Our track.
These are chassis used by people in the 1:24 scene — for orientation, not as a shopping list. Cars and kits are available from the respective manufacturer or retailer; from us you get the track underneath. A brand name doesn't guarantee a scale: check the model spec before buying.
Markenbeispiel
ARKEDGE AE24X EVO-R
1:24 RWD-Chassis, laut Hersteller vormontiert erhältlich. Verstellbare Aufhängung heißt: Du kannst dieselbe Strecke ruhiger oder aggressiver abstimmen.
HerstellerangabeMarkenbeispiel
HPI Racing Stage-D24
Fertig aufgebautes 1:24-Driftfahrzeug aus dem HPI-Programm. Gute Wahl, wenn du ohne Bauabend direkt auf die Matte willst.
HerstellerangabeStage-D24 Strecken-GuideAtomic
Markenbeispiel
Atomic
Atomic baut mehrere Drift-Baureihen in unterschiedlichen Größen — vom kleineren DRZ-Umfeld bis zu größeren Plattformen. Prüf vor dem Kauf die Modellangabe: Nicht jede Baureihe ist 1:24. Beide Größen laufen bei uns auf denselben 1:24-Matten.
HerstellerangabeTG Racing
Markenbeispiel
TG Racing
Aus der Kleinmaßstab-Driftszene bekannt, mit Chassis und Tuningteilen für RWD-Drift. Welche Baureihe zu unseren 1:24-Layouts passt, hängt am konkreten Modell — die Streckenbreite ist dieselbe.
Dein Chassis steht nicht dabei?
Das ist eine Beispielliste, keine abgeschlossene Kompatibilitätsliste. Wir verkaufen Strecken, keine Fahrzeuge — unsere 1:24-Layouts sind auf Wendekreis und Tempo typischer 1:24-Chassis ausgelegt. Reifen und Setup beeinflussen das Rutschverhalten weiterhin.
Chassis images are from the respective manufacturers and do not show DriftTracks products. We don't sell vehicles or chassis parts.
In the room
Tight and technical, or flowing and fast?
Tight layouts with lots of direction changes reward clean countersteering in a small area. Long, sweeping corner combinations need more space but reward you with long, sustained drifts. Both characters exist in our range — what matters is your floor space, not the scale.
Compatibility
Your chassis, our track.
We don't sell cars — we build tracks. That focus shows in every layout: corner radii, section widths and surface are designed for real drift behaviour rather than a compromise. Your 1:24 chassis rolls straight onto it — brand-open, not limited to one particular chassis.
- Brand-open for 1:24 chassis — examples: RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24
- Naming a brand doesn't mean every model of that brand is 1:24 — and implies no partnership or certification
- Tyres and setup influence slip behaviour; we don't promise identical behaviour for every configuration
- 1:28 chassis such as Atomic DRZ or Kyosho Mini-Z can usually use 1:24 layouts too
- Radii and section widths designed for real turning circle and drift speed
- You set the grip yourself — with Track Reload spray from our accessories
FAQ
Frequently asked questions about the 1:24 track.
How much space do I need for a 1:24 RC drift track?
Our smallest 1:24 layout (Wohnzimmer Drift) measures 250 × 150 cm, the largest (HIGH END DRIFT) 591 × 300 cm. Add about 30 cm of run-off all round so an over-cooked drift doesn't end straight at the wall. The space finder on the homepage shows you directly which track fits your area.
Which chassis is the 1:24 scale intended for?
Brand-open for common 1:24 RC drift chassis — examples are RhinoRacing RTS, Atomic, TG Racing, ARKEDGE or HPI Stage-D24. Naming a brand doesn't mean every model of that brand is 1:24, nor does it imply a partnership or that every model has been checked. Radii and section widths are designed for the turning circle and speed of typical 1:24 chassis; tyres and setup still influence handling.
Are the tracks pre-treated?
No. The layouts are optimised for drift by their flow; you set the correct slip behaviour yourself with our Track Reload spray from the shop. That way you control the grip and can refresh it at any time.
The track has creases after unpacking — what should I do?
When first unrolled, the PVC mat needs a bit of time before it lies completely flat. Warm steam helps, for example from a steam cleaner or an iron with steam (don't place it directly on the mat).
Are new 1:24 layouts being added?
Yes. Our range keeps growing — we're continuously developing new track layouts and sizes. The current nine 1:24 layouts are today's status, not the end of the line. Check back in the shop regularly or ask us what's currently in the works.
Do you also sell chassis or tuning parts?
No. We focus 100% on drift tracks and matching track accessories. That's exactly why our layouts are developed so uncompromisingly around flow, radii and surface — you bring your own chassis — brand-open, for example RhinoRacing RTS, Atomic, TG Racing, ARKEDGE or HPI Stage-D24.
Are custom sizes available?
Yes. In the buy box of every track you can request a custom size by email — we'll get back to you with price and feasibility.