Raceway of Drift
excl. shipping·Germany 2–4 working days, other countries 4–10 working days
Made to order — production typically takes 2–4 working days
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 600 × 300 cm
Compatibility: Brand-open for 1:24 RC drift chassis (e.g. RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24) · 1:28 chassis also run on these mats
PVC RC drift track — roll out and drive. Layout-optimised for drift in Germany. Add Track Reload for the right slide.
- Made in Germany
- Layout-optimised
- Track Reload ready
- Waterproof
- UV-stable
- 2–4 working days production
Know your setup
Product details
Description
Wide drift arcs, tight hairpins, and space for free training: This track combines fluid sections with technical corner combinations. Marked clipping zones provide orientation to refine your line and practice precise transitions.
A special highlight is the generous turquoise training area with circular markings. Here you can practice controlled circular drifts and train the interaction between throttle and counter-steering.
Detailed tire marks, sandy run-off areas, printed concrete barriers, and the small stream give the layout its character. The service area with parking space markings completes the track's look.
The printed PVC track mat can be unrolled on a flat surface and stored away to save space after the session.
Technical data
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 600 × 300 cm
- Material
- Premium PVC tarp
- UV-HD print
- Use
- Indoor
- Surface
- PVC tarp; Track Reload recommended for sliding behavior
- Waterproof
- Yes
- Origin
- Made in Germany
In the box
- 1× Raceway of Drift (Drift Track)
- Cars, barriers, curbs and surface spray shown in images are only included when explicitly listed above.
Good to know
Frequently asked questions
Is the track ready to race straight away?
The layout is optimised for drift. For the right slide behaviour, we recommend Track Reload PVC Drift Surface Spray from the shop.
Will the sheet curl back up?
Right after unrolling you may still see creases. They flatten out over time on their own – warm steam (steam cleaner or iron held at a distance) speeds this up. Lightly weighting the corners helps as well.
Which vehicles are compatible?
The 1:24 variant is brand-open for 1:24 chassis — examples: RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24; 1:28 chassis are generally suitable too, depending on chassis, tyres and setup. The 1:43 variant is built around the Sturmkind DR!FT-Racer. Carrera HYBRID (manufacturer scale 1:50) is planned through the track designer.
How do I clean the track?
Wipe dry with a microfibre cloth. Slightly damp if necessary — no solvents.
Are custom sizes available?
Yes, custom layouts and sizes on request. Simply contact us by email or WhatsApp.
Your space. Your track. Your drift.
Roll out, tune, drift — every layout is printed in Germany and built for real sessions.