Community Track 3: DriftWorks24rc
excl. shipping·Germany 2–4 working days, other countries 4–10 working days
Made to order — production typically takes 2–4 working days
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 300 × 200 cm
Compatibility: Brand-open for 1:24 RC drift chassis (e.g. RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24) · 1:28 chassis also run on these mats
PVC RC drift track — roll out and drive. Layout-optimised for drift in Germany. Add Track Reload for the right slide.
- Made in Germany
- Layout-optimised
- Track Reload ready
- Waterproof
- UV-stable
- 2–4 working days production
Tandem drift animation
Track in action
Experience the layout in tandem drift.
This animation illustrates the track layout and drift line. It is not real footage of the printed mat.
Know your setup
Product details
Description
Community Track #1 – DriftWorks24rc
With the DriftWorks24rc, we launch our new Community Track series.
The special thing about this layout: The track was not specified by us, but completely planned and designed by a customer using our DriftTracks track editor. From the track course to the placement of individual sections, a personal layout was created here, which was then implemented as a real PVC drift track.
The DriftWorks24rc track offers a varied course with fast sections, tight corners, and various opportunities for clean lines and controlled drifts. This makes the track suitable for both relaxed sessions and small battles with friends.
Like all our tracks, this community layout is produced on robust PVC tarpaulin and can simply be rolled up and stored in a space-saving manner after driving.
From the community – for the community
Our Community Tracks show what is possible with the DriftTracks editor. Every driver can develop their own track, and with a bit of luck, a personal design can even become an official track in our shop.
The DriftWorks24rc marks the beginning and is therefore Community Track #1 of our series.
Ideal for 1:24 RC drift vehicles and everyone who doesn't just want to drive any track, but is looking for a layout with its own story.
Do you want to design your own track? With our track editor, you can plan your individual track yourself and then have it produced by us.
Technical data
- Scale
- 1:24 (usually 1:28 too)
- Outer dimensions
- 300 × 200 cm
- Material
- Premium PVC tarpaulin
- UV HD print
- Use
- Indoor
- Surface
- PVC tarpaulin; Track Reload recommended for sliding behavior
- Waterproof
- Yes
- Origin
- Made in Germany
In the box
- 1× Community Track 1: DriftWorks24rc (Drift Track)
- Care & setup instructions
- Drift Tracks sticker set
- Cars, barriers, curbs and surface spray shown in images are only included when explicitly listed above.
Good to know
Frequently asked questions
Is the track ready to race straight away?
The layout is optimised for drift. For the right slide behaviour, we recommend Track Reload PVC Drift Surface Spray from the shop.
Will the sheet curl back up?
Right after unrolling you may still see creases. They flatten out over time on their own – warm steam (steam cleaner or iron held at a distance) speeds this up. Lightly weighting the corners helps as well.
Which vehicles are compatible?
The 1:24 variant is brand-open for 1:24 chassis — examples: RhinoRacing RTS, Atomic, TG Racing, ARKEDGE, HPI Stage-D24; 1:28 chassis are generally suitable too, depending on chassis, tyres and setup. The 1:43 variant is built around the Sturmkind DR!FT-Racer. Carrera HYBRID (manufacturer scale 1:50) is planned through the track designer.
How do I clean the track?
Wipe dry with a microfibre cloth. Slightly damp if necessary — no solvents.
Are custom sizes available?
Yes, custom layouts and sizes on request. Simply contact us by email or WhatsApp.
Your space. Your track. Your drift.
Roll out, tune, drift — every layout is printed in Germany and built for real sessions.