Built by a Drifter. Not by a Print Shop.
Drift Track Germany exists because I couldn't buy a drift track with real flow anywhere in Germany. So I started designing them myself — as a drifter, with a designer's eye.
Thomas Kramwinkel
Founder · Drifter · Graphic Designer
Hi, I'm Thomas.
I've been drifting for years — it all started in 1:10 with a Yokomo YD-2, later a fully equipped ReveD RDX MCIII. Today I've specialised in 1:24: a DMA chassis, a fully upgraded Rhino Racing RTS, and an ARKEDGE Evo-R that every new layout has to prove itself on.
I'm a graphic designer by trade. Which means I can't look at a sloppy layout without wanting to redraw it — and at some point I'd had enough of copied tracks, lazy prints, and mats that wouldn't lie flat. On top of that: in Germany there simply wasn't a good drift track with real flow to buy.
So I combined both — the drifter's eye for line and flow, and the designer's craft for layout and print — and founded Drift Track Germany. Today I build exactly the tracks I want to drive myself, and ship them to drifters all across Germany and Europe.
Everything in this shop is something I run myself or would recommend to a friend: tracks that flow, and the accessories that turn a layout into a real drift spot.
“I build the tracks I want to drift on myself. If I wouldn't run it, it doesn't ship.”
— Thomas Kramwinkel, Founder
Transparency · Design & AI
All track layouts are designed by hand in professional image-editing software — no AI involved in the designs. Only some product images are AI-assisted mock-ups, used to give you a realistic, tactile feel for the product. What matters for scope, dimensions and material is always the written product description.
From 1:10 Rookie to 1:24 Specialist.
Every chassis in this list shaped how our tracks are designed. This isn't theory — it's seat time.
- 1:10
Yokomo YD-2
Where it all started. First steps in RC drifting — learning lines, weight transfer, and what makes a layout flow.
- 1:10
ReveD RDX MCIII
Fully equipped competition chassis. Setups, tuning, countless packs — and a growing eye for what a good drift line really needs.
- 1:24
DMA Chassis
The switch to the small scale. Big-track feeling on the living-room floor — if the layout is right.
- 1:24
Rhino Racing RTS · Fully Upgraded
Every hop-up, every setting explored. Test bench and daily driver for our 1:24 layouts.
- 1:24
ARKEDGE Evo-R
The current reference chassis. Every new layout is proven on it before it goes to print.
All About The Track.
We focus on the surface: the layout you drive on, the grip on it, and the details that make it look alive.
PVC Drift Tracks
Our own layouts — BIG DRIFT, HIGH FLOW, LAKESIDE, HIGH END — printed on UV-stable PVC in 1:24, 1:28 and 1:43. Optimised for drift lines, rolled for shipping, ready to unroll.
Grip & Track Reload
Track Reload surface spray sets the slide exactly where you want it. Our layouts are optimised for drift lines — you dial in the grip yourself and refresh it any time.
Matched to your driving system
Our 1:24 layouts suit cars such as the Rhino Racing RTS, ARKEDGE AE24X and HPI Stage-D24. Depending on chassis, tyres and setup, 1:28 models such as the Atomic DRZ or Kyosho Mini-Z are generally suitable too. The 1:43 layouts are designed for the Sturmkind DR!FT-Racer.
Accessories & Scenery
Barriers, curb sets, cones, and 3D-printed scenery pieces produced in Germany. The small details that turn a printed mat into a convincing drift location.
Four Things We Never Compromise On.
If a track doesn't meet these, it doesn't ship.
Layout-optimised, not off-the-shelf.
Every track is designed for controlled drifting. For the right slide behaviour, get Track Reload from the shop. You're not getting a raw product — you're getting a finished layout.
Pro PVC, not craft-store vinyl.
Tear-resistant, waterproof, dimensionally stable. Lies completely flat within 1–2 hours and holds thousands of drift runs.
Scale-accurate by design.
Corners, radii, and tyre lines are precisely tuned for 1:24, 1:28, and 1:43 — not just scaled, but redrawn from scratch.
Made in Germany.
Design, print, and finishing all in Germany. Short supply chains, clear accountability, honest quality.
From Sketch to First Drift.
Designer by trade — every layout starts as a drawing, not a template.
Layout Design
We draw every layout ourselves in professional image-editing software — no AI-generated designs. Radius, apex, and drift line are checked before anything goes to print.
HD Print on PVC Mat
UV-stable, high-resolution print on heavy-duty PVC. Colours that still pop after 100 runs.
Track Reload Ready
The layout is built for controlled drift lines. Add Track Reload for the slide real RC drifting demands.
Ready to Ship
Cleanly rolled, securely packed, dispatched with tracking. Unbox, unroll, start drifting.
What We Don't Stand For.
- ✕Generic mockup tracks
- ✕AI-generated layouts with no drift logic
- ✕Plain PVC sheeting without a real track layout
- ✕Scaled-down 1:10 layout for 1:24
- Original layouts, drawn by drifters
- Pro PVC mat, UV-stable & waterproof
- Layout-optimised for controlled drift
- Scale-accurate design per scale
“A good drift track isn't printed. It's drawn by someone who drifts.”
Pick Your Track.
We'll Finish It for You.
BIG DRIFT and HIGH FLOW in the shop — available in 1:24 / 1:28 and 1:43. Custom sizes on request.